2000 Series Dual Mode Servo (25-3, Speed) - купить по выгодной цене | stemshop.kz

2000 Series Dual Mode Servo (25-3, Speed)

(0)
Add to comparison
Buy in one click

This servo is a version of the popular 2000-0025-0002 “TORQUE” Servo with a lower gear ratio to boost operating speed. It runs more than twice as fast, saving precious time when every second counts.

Like the 25-2, it supports two operating modes:

  • Standard Mode – Rotates up to 300 ° with position feedback, commanded via a PWM signal.

  • Continuous-Rotation Mode – Using the 3102 Series Dual-Mode Servo Programmer (1-1) you can switch the servo to continuous rotation, where speed is controlled by the PWM signal.

Description
Characteristics
Description
Specs  
Weight 58g
Gear Ratio 135:1
Output Shaft Style 25 Tooth Spline
Voltage Range 4.8V ~ 7.4V
No-Load Speed (4.8V) 0.11 sec/60° (90RPM)
No-Load Speed (6.0V) 0.09 sec/60° (115RPM)
No-Load Speed (7.4V) 0.07 sec/60° (145RPM)
Stall Torque (4.8V) 7.9 kg.cm (110 oz-in)
Stall Torque (6.0V) 9.3 kg.cm (130 oz-in)
Stall Torque (7.4V) 10.8 kg.cm (150 oz-in)
No-Load Current (4.8V) 190mA
No-Load Current (6.0V) 200mA
No-Load Current (7.4V) 230mA
Stall Current (4.8V) 2000mA
Stall Current (6.0V) 2500mA
Stall Current (7.4V) 3000mA
Max PWM Range (Default) 500 - 2500μsec
Max PWM Range (Continuous) 1000 - 2000μsec
Travel per µsec (Default) 0.15°/μsec
Max Travel (Default) 300°
Pulse Amplitude 3-5V
Direction
Clockwise w/ Increasing PWM Signal
Deadband Width 4μsec
Motor Type Brushed DC
Feedback Style 5KΩ Potentiometer
Output Shaft Support Dual Ball Bearing
Gear Material Steel
Wire Length 300mm
Wire Gauge 22 AWG
Connector Type
3-Pos TJC8 Servo Connector [MH-FC]
Direction with Increasing PWM Signal Clockwise
Characteristics
Бренд
goBILDA ®
Категория FIRST
FIRST® Tech Challenge
Previously viewed
Preorder
Preorder sent successfully!
Name *
Phone *
Add to Shopping Cart
Название товара
100 тг
1 шт.
Go to cart
Back call
Request sent successfully!
Name *
Phone *
Заказ в один клик