The 2302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 100 Tooth) is a precision-machined aluminum hub mount gear with 100 teeth and an MOD 0.8 pitch. It is compatible with any MOD 0.8 gear, but is most commonly used with a 20-tooth pinion or servo pinion. When combined with a 20-tooth servo pinion, it creates a 5:1 gear ratio, which reduces output speed and increases torque fivefold. It can also be configured as an overdrive or underdrive, depending on the application.
The 14mm bore allows the gear to be mounted to a hub mount, providing a secure connection to the shaft. The aluminum body with clear anodizing guarantees durability and wear protection.
- Material: Aluminum
- Weight: 38 g
- Finish: Clear anodizing
- Number of teeth: 100
- Tooth pitch: MOD 0.8
- Pressure angle: 20°
- Shaft bore diameter: 14 mm
- Mounting type: hub mount
- Compatibility: with any MOD 0.8 gears, optimally with a 20-tooth pinion or servo gear for 5:1 transmission
Recommended for drive systems and manipulators where an increase in torque at reduced rotation speed is critical, as well as for configurations with sub- or overdrive.
