The 2302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 105 Tooth) is a precision-machined aluminum gear with 105 teeth and an MOD 0.8 pitch. It is compatible with any MOD 0.8 gear, but is most commonly used in conjunction with a 15-tooth pinion or servo pinion. When combined with a 15-tooth servo pinion, it creates a 7:1 gear ratio, which reduces output speed and increases torque sevenfold. It can also be configured as an underdrive or overdrive, depending on the application.
The 14mm center bore allows the gear to be mounted to a hub mount, providing a secure connection to the shaft. Clear anodized aluminum body provides durability and wear protection.
- Material: Aluminum
- Weight: 42 g
- Finish: Clear anodized
- Number of teeth: 105
- Tooth pitch: MOD 0.8
- Pressure angle: 20°
- Shaft bore diameter: 14 mm
- Mounting type: hub mount
- Compatibility: with any MOD 0.8 gears, optimally with a 15-tooth pinion or servo gear for 7:1 transmission
Recommended for drive systems and manipulators where a significant increase in torque at reduced speed is required, as well as for configurations with sub- or overdrive.
