1x15A Motor Controller (9-14V Input)

1x15A Motor Controller (9-14V Input) provides simple, proportional control of the speed and direction of a single brushed DC motor. Connects to a 9-14V power source via XT30, to an R/C receiver, Arduino, or other PWM signal, and the motor is connected via 3.5mm bullet connectors.

• Compatible Motor Type: Brushed DC
• Number of Channels: 1
• Input Voltage: 9 - 14VDC
• Maximum Continuous Current: 15A
• Peak Current: 25A
• BEC Voltage: 6VDC, BEC Current: Up to 3A
• Signal Input: R/C PWM, 1050-1950 μsec
• Power Connector: XT30
• Motor Connector: 3.5mm Bullet
• Weight: 41 g
• Protections: Reverse voltage, overload/short circuit, overtemperature, signal blocking zone
• Mounting: Four 32 mm square holes, compatible with 8 mm goBILDA® grid, hole diameter 4 mm, also fits #8 screws

The controller is equipped with a safe case that protects the board from damage and ensures reliable fixation in the project. The receiver is powered via the built-in BEC, and the motor can be connected directly thanks to the reversible operation of brushed DC motors.