1x20A Motor Controller (9-30V Input)

1x20A Motor Controller (9-30V Input) provides proportional speed and direction control for a single brushed DC motor. It connects to a 9-30V power source via an XT30, an R/C receiver, an Arduino, or other PWM signal, and the motor is connected via 3.5mm bullet connectors. Built-in BEC provides 6V, 6A power to the receiver.

• Compatible Motor Type: Brushed DC
• Number of Channels: 1
• Signal Input: R/C PWM, 1100-1900 μs, Voltage 3.3-5V
• Input Voltage: 9 - 30VDC (3-7S)
• Continuous Current: 20A
• Peak Current: 30A
• BEC Voltage: 6.2V, BEC Current: 6A, Peak Current: 7.5A
• Power Connector: XT30 (FH-MC)
• Motor Connector: 3.5mm Bullet (MH-FC)
• Signal Connector: 2.54mm Female (TJC8)
• Weight: 52g (including fasteners)
• Fasteners: 4 x M4 20mm Hex Head Screws, 4 x M4 Nylock Nuts
• Protection: Reverse Voltage, Overload/Short Circuit, Over Temperature, Signal Blocking Zone
• Mounting: 32mm Square, compatible with 8mm goBILDA® grid, Ø4mm holes also fit #6 screws

The controller is equipped with a safe case that protects the board from mechanical damage and provides convenient mounting in the project. Brushed DC motors can be connected directly thanks to their reversible operation.