Dual Servo Commander allows you to control the rotation of up to four servos. Each of the two controllers provides real-time control of up to two servos on a single channel. Six buttons store customizable motion positions and also allow you to select one of four preset PWM ranges at device power-on.
- Weight: 55g
- Power Supply: 5-15VDC
Servo connections are made via two sets of 2.54mm (0.1”) connectors supporting up to four servos. To increase the distance between the controller and the servos, a CAT-6 output is used, which transmits all PWM signals to the Servo Extension Receiving Board (SKU: 3116-4527-0001).
Servo positions are programmed by holding the button until the LED is constantly lit. Each button can control a separate channel or both at once. Additionally, an external button trigger is possible via JST PH connectors for storing or recalling positions.
PWM ranges are configurable without a computer. Four Preset ranges ensure optimal operation with a variety of servos: 1050–1950 µs (90°), 850–2150 µs (for Hitec and Savox), 600–2400 µs (for analog servos up to 180°), 500–2500 µs (for full goBILDA servo travel).
Mounting is via countersunk holes on a 32 mm × 80 mm template matching the 8 mm grid of the goBILDA design, using M4 screws and nuts for easy installation.
