Servo Commander allows you to control servo rotation in real time using an input knob, and four buttons store custom motion positions. The buttons also allow you to select one of four preset PWM ranges when the device is turned on.
- Weight: 20g
- Power supply: 5-15VDC
Servo connections are made via two sets of 2.54mm (0.1”) connectors for controlling up to two servos simultaneously.
Programming a servo position is simple: hold down the selected button until the corresponding LED is constantly lit to save the position. The next press will return the servo to the saved position.
PWM ranges are configurable without a computer. Four preset ranges provide optimal performance with a variety of servos: 1050-1950μs (90°), 850-2150μs (for Hitec and Savox), 600-2400μs (for analog servos up to 180°), 500–2500 µs (for the full travel of the goBILDA servo).
To change the output direction, hold down both buttons while turning on the device. The LED indicator shows the direction of the signal change.
Mounting is carried out via four through-holes with a hexagonal countersink on a 32 mm template, which allows the Servo Commander to be mounted from the top or bottom using M4 fasteners.
