Stingray-2 Servo Gearbox (0.33 sec/60°, 30RPM, 700 oz-in Torque, 900° Rotation) - Feedback Mode

Stingray-2 Servo Gearbox (Feedback Mode) features a goBILDA® 5-Turn Torque servo and a 2:1 external gearbox, reducing the rotation range and doubling the torque and precision. The gearbox is fully assembled and ready to install.

• Weight: 218g
• Reduction Ratio: 2:1
• Voltage Range: 4.8V–8.4V
• No-Load Speed (4.8V): 0.50 sec/60° (20 RPM)
• No-Load Speed (6.0V): 0.40 sec/60° (25 RPM)
• No-Load Speed (7.4V): 0.33 sec/60° (30 RPM)
• No-Load Torque (4.8V): 480 oz-in (34.6 kgf.cm)
• No-Load Torque (6.0V): 600 oz-in (43.2 kg cm)
• No-Load Torque (7.4V): 700 oz-in (50.4 kg cm)
• No-Load Current (4.8V): 150 mA
• No-Load Current (6.0V): 160 mA
• No-Load Current (7.4V): 200 mA
• Starting Current (4.8V): 2000 mA
• Starting Current (6.0V): 2500 mA
• Starting Current (7.4V): 3000 mA
• Motor Type: Brushed DC
• Direction when increasing the PWM signal: counterclockwise
• Maximum PWM range: 500-2500μs
• Stroke per μs: 0.45°/μs
• Maximum rotation angle: 900° (2.5 turns)
• Signal amplitude: 3-5V
• Dead zone width: 4μs
• Wire length: 300mm
• Wire cross-section: 22AWG
• Connector type: 3-Pos TJC8 Servo Connector [MH-FC]
• Intellectual property: Patented

The servo, mounted in the gearbox, is isolated from the load on the steel shaft with bearings, which protects the motor from axial loads. M4 mounting holes on the housing ensure compatibility with the goBILDA® system. Suitable for connection to R/C receivers, Arduino, Raspberry Pi, and REV controllers. The servo can be switched to continuous rotation mode using the 3102-0001-0001 Servo Programmer.