Stingray-4 Servo Gearbox (Continuous Mode) is driven by a goBILDA® 5-Turn Torque servo and an external 4:1 gearbox, which reduces the rotational range and quadruples torque and precision. The gearbox is fully assembled and ready to install in your project. In continuous mode, the PWM signal controls the speed and direction, not the servo's position. :contentReference[oaicite:0]{index=0}
- Weight: 220g
- Reduction Ratio: 4:1
- Voltage Range: 4.8V – 8.4V
- No-Load Speed (4.8V): 1.00 sec/60° (10 RPM)
- No-Load Speed (6.0V): 0.80 sec/60° (12.5 RPM)
- No-Load Speed (7.4V): 0.67 sec/60° (15 RPM)
- Torque (7.4V): Up to 1400 oz‑in (100.8 kg‑cm)
- Maximum Rotation Angle: Up to 450° (1.25 English: (revolutions) :contentReference[oaicite:1]{index=1}
- Motor type: brushed DC
- Maximum PWM range: 500–2500 μsec
- Wire length: 300 mm, cross-section: 22 AWG, connector: 3-Pos TJC8 Servo Connector [MH-FC] :contentReference[oaicite:2]{index=2}
The gearbox isolates the load on the steel shaft with ball bearings, which protects the motor from axial loads. The housing has M4 threaded holes for compatibility with the goBILDA® system and allows you to easily mount the unit in your designs. Compatible with R/C receivers, Arduino, Raspberry Pi and other PWM controllers. :contentReference[oaicite:3]{index=3}
This continuous rotation mode option is particularly useful for applications where both speed and direction control are required, such as drives, conveyors, wheel drives, and other continuously rotating mechanisms.
