The Stingray-5 Servo Gearbox (Feedback Mode) is driven by a goBILDA® 5-Turn Torque servo and an external 5:1 gearbox, which reduces the rotational range and increases torque and precision fivefold. The gearbox is fully assembled and ready to install, and the PWM signal controls the output shaft position just like a conventional servo. :contentReference[oaicite:0]{index=0}
- Weight: 219g
- Gear Ratio: 5:1
- Voltage Range: 4.8V–8.4V
- No-Load Speed (4.8V): ~8 RPM (1.25 sec/60°)
- No-Load Speed (6.0V): ~10 RPM (1.00 sec/60°)
- No-Load Speed (7.4V): ~12 RPM (0.83 sec/60°)
- Brake Torque (7.4V): Up to 1750 oz‑in (126 kg‑cm)
- Maximum Rotation Angle: 360° (1 revolution) at Wide PWM signal
- Maximum PWM range: 500–2500 μsec
- Motor type: DC brushed
- Wire length: ~300 mm, cross-section: 22 AWG
- Connector: 3-Pos TJC8 Servo Connector [MH-FC]
The gearbox uses a steel shaft with ball bearings to protect the servo from axial loads and is equipped with M4 threaded holes for compatibility with goBILDA® designs. In feedback mode, the PWM signal controls position in the same way as a standard servo, including a full revolution in a wide PWM configuration. :contentReference[oaicite:1]{index=1}
Suitable for applications requiring precise positional control of high-power, low-speed drives, such as robotics, grippers, and positioning units.
