The Stingray-5 Servo Gearbox (Continuous Mode) is driven by a goBILDA® 5-Turn Torque servo and an external 5:1 gearbox, which reduces the rotational range and increases torque and precision fivefold. The gearbox is fully assembled and ready for installation, and a PWM signal controls the speed and direction of the output shaft. ([gobilda.com](https://www.gobilda.com/stingray-5-servo-gearbox-0-85-sec-60-12-rpm-1750-oz-in-torque-360-rotation/?utm_source=chatgpt.com))
- Weight: 219 g
- Gear Ratio: 5:1
- Voltage Range: 4.8–8.4 V
- No-Load Speed (4.8 V): ~8 RPM (1.25 sec/60°)
- No-Load Speed (6.0 V): ~10 RPM (1.00 sec/60°)
- No-Load Speed (7.4 V): ~12 RPM (0.83 sec/60°)
- Brake Torque (7.4V): Up to 1750 oz‑in (126 kg‑cm)
- Maximum Rotation Angle: Infinite (speed and direction control)
- Maximum PWM Range: 500–2500 μsec
- Motor Type: Brushed DC
- Wire Length: ~300 mm, Cross Section: 22 AWG
- Connector: 3-Pos TJC8 Servo Connector [MH-FC]
The gearbox uses a steel shaft with ball bearings to protect the servo from axial loads and is equipped with M4 threaded holes for compatibility with goBILDA® designs. In continuous rotation mode, the PWM signal controls the speed and direction of rotation, making the unit suitable for linear actuators, conveyors, rotating platforms, and other applications requiring powerful continuous rotation. ([gobilda.com](https://www.gobilda.com/stingray-5-servo-gearbox-0-85-sec-60-12-rpm-1750-oz-in-torque-360-rotation/?utm_source=chatgpt.com))
