Shark-2 Servo Gearbox (0.28 sec/60°, 36 RPM, 944 oz-in Torque, 1260° Rotation) - Feedback Mode

The Shark-2 Servo Gearbox (Feedback Mode) is powered by a Hitec HSR-M9382TH servo with a brushless motor and titanium gears. The gearbox is fully assembled and ready to install; the shaft rotates with increased precision and torque thanks to a 2:1 external gear ratio. ([gobilda.com](https://www.gobilda.com/shark-2-servo-gearbox-0-28-sec-60-36-rpm-944-oz-in-torque-1260-rotation/?utm_source=chatgpt.com))

• Weight: 223 g
• Gear Ratio: 2:1
• Voltage Range: 6–8.4 V
• No-Load Speed (7.4 V): 0.28 sec/60° (≈ 35.7 RPM)
• Torque (6–7.4 V): 944 oz‑in (≈ 68 kg‑cm)
• Maximum Rotation Angle: 1260° (3.5 Turns)
• Motor Type: Brushless DC
• PWM Range: 800–2200 μsec
• Cord: 300 mm, cross-section: 22 AWG
• Connector: 3-Pos TJC8 Servo Connector [MH-FC]

The housing with ball bearings isolates the load from the servo, protecting it from axial forces. The gearbox has M4 threaded holes on the housing and on the top hub for convenient mounting, compatible with the goBILDA® system. Ideal for position control in projects with Arduino, Raspberry Pi, R/C receivers, or REV controllers.