Description
Characteristics
Description
HS-788HB Servo is a multi-turn analog servo based on the popular HS-785HB. It features a 25-tooth output spline for compatibility with most hobby servos. It supports up to 7.85 turns while maintaining position feedback thanks to an underdrive potentiometer. The servo output shaft is supported by a pair of ball bearings, and the gears are made of Carbonite for high wear resistance. Includes servo arm with 2.5mm Allen screw and mounting hardware for vibration damping installation.
- Weight: 97g
- Type: Analog
- Output shaft: 25-tooth spline
- Voltage range: 4.8V–6V
- No-load speed (4.8V): 1.68 sec/360°
- No-load speed (6.0V): 1.38 sec/360°
- Torque at 4.8V: 11.0 kgf.cm (153 oz.in)
- Torque at 6.0V: 13.2 kgf.cm (183 oz.in)
- Maximum PWM Range: 600~2400μs
- Stroke per μs: 1.57°/μs
- Maximum Rotation: 7.85 turns (2826°)
- Pulse Amplitude: 3~5V
- PWM Increasing Direction: Clockwise
- Dead Zone Width: 8μs
- Motor Type: 3-Pole Ferrite
- Feedback: 5kΩ Potentiometer
- Output Shaft Support: Double Ball Bearing
- Gear Material: Carbonite
- Wire Length: 300mm
- Wire Size: 22 AWG
- Connector type: 3-Pos TJC8 Servo Connector [MH-FC]
Characteristics
Brand
goBILDA®
FIRST category
FIRST ® Tech Challenge
Previously viewed
