6V Servo Power Injector (6 Channel, 8-15V Input) — This module provides six TJC8 input and output connectors for servos. Input signals are directly routed to the outputs, and the output connectors distribute 6V at 24A. The module features reverse voltage protection, overcurrent protection, and thermal compensation for safe operation without shutdown under overload. A switch blocks output power until a PWM signal greater than 500µs is detected, preventing incorrect wiring. Rated to deliver 24A at 6V for up to 2 minutes 30 seconds at room temperature, providing stable operation over the course of a standard FTC match.
- Weight: 62g (including mounting hardware and wiring)
- Included: 4 x M4 x 20mm long socket head cap screw, 4 x M4 x 0.7mm Nylock nuts
- Wiring Included: 6 x Servo Extension Cable, red wire removed (3-pos TJC8, MH-FC, 200mm)
- Input Voltage: 8-15V
- Output Voltage: 6V
- Output Current: 24A
- Power Input Connector: XT30 (FH-MC)
- Input Signals: TJC8 Servo (FH-MC)
- Output connectors: TJC8 Servo (FH-MC)
Application: stable power supply for servos on robots and mechanisms with high current loads, protection against overloads, overheating, and incorrect connection.
